Should i stain cherry wood




















Welcome to my blog. I hope you find this blog useful and insightful. Feel free to leave a comment in the bottom. Thank you! Blog Gallery About Contact. Finishing Cherry Wood - How to How Do you get the best finish for cherry wood? Blotchy Cherry Finish The main problem with finishing cherry wood is that it has a tendency to blotch with any kind of stain or tinted oil.

The Best Finish for Cherry Wood? View fullsize. Cheating Father Time So, you don't have a lot of patience huh? Conclusion - Have Patience So, in conclusion, cherry wood is an awesome choice for building furniture and is highly desirable. Get updates on future blog posts! First Name. Last Name.

Search for a Tool Keywords:. Osmo Polyx-Oil - Clear Matte -. Formby Tung Oil,High gloss Ounce. Woodworking Tips Derik VanVleet February 17, cherry wood , finish , wood finish , finishing cherry , cherry wood finish , finishing wood , how to , tips. Instead of using stains, they get the color with glazes and toners. Glazes are thickened stain applied in between coats of finish. Toners are the finish itself with the color usually dye added.

Toners are always sprayed. If a stain is used at all, it is thinned a great deal and sprayed thin on the bare wood and left to dry without wiping. This produces a more even coloring than a wet coat wiped dry. The staining is almost always followed by a glaze, toner or both. The end result is reduced blotching because it is largely covered over. Most boards and veneer blotch when stained, and also when finished without a stain.

Over time the blotching is muted as the heartwood darkens naturally to a rust-red color. This finish is similar to boiled linseed oil, but you get a tough, protective coating once you apply multiple coats. The incidence of blotching gets reduced. Here too, it takes a long time to dry, and the finish emits a caustic odor.

The soaked rags are also a fire hazard. There can be a little blotching, but not as much as with boiled linseed oil. With this finish, you get a crystal-clear color. It is an easy finish to apply. You can get different finishes with multiple coats from flat, satin, semi, or gloss sheens. You will find it easy to repair this type of finish as well. Cherry wood gets a natural look through clear dewaxed shellac.

It dries crystal clear, and you can apply other types of finishes over it, so it is very versatile. You will find clear dewaxed shellac easy to apply as well. If you want to highlight the contrast between the heartwood and sapwood, you will find this suitable for your purposes.

You get a durable and clear finish, and the grain and character of the cherry wood will get enhanced with it. Since tung oil is by far the most popular finish for cherry wood, we thought it appropriate to feature a popular brand of this widely-used oil.

Also known as Chinese wood, tung oil is what we call a drying oil. It is extracted from the tung tree, which grows in China. Tung oil imparts an impressive matte finish to wood and is considered to be environmental-friendly. These finishes will be covered in other articles…. The golden tones of the reflected light from cherry make the effect particularly striking.

These two pictures are of the same board. I took the upper picture in an area that was shaded, but lit brightly by the sunlight.

The lower picture was taken without exposure to bright lighting. The top picture gives you an idea of the effect the reflected light has on the appearance, but it looks much better in person. Freshly Planed Cherry When freshly planed, the heartwood is light pink and the sapwood is a light cream color.

Should Cherry be Stained? What About Blotching? Clear Coat Finishes We use clear coats on wood to protect it from various hazards including dirt and water. All Rights Reserved.



0コメント

  • 1000 / 1000